Skip to content

Getting started with the ESP8266

Getting started with the ESP8266 your first Wi-Fi projects (2:00). Chapters and transcript

What you need

The ESP8266 is a small, inexpensive Wi-Fi chip, the one inside CryptoTicr. It comes on little development boards sold almost everywhere, and it is a friendly way to start making Wi-Fi projects of your own. To begin:

The tools

All free:

First projects, one step at a time

  1. Blink. Open the Blink example and upload it. The board’s light flashing proves the board, the cable and the tools all work.
  2. Join your Wi-Fi. Use the Wi-Fi example to connect, and print the board’s address.
  3. Serve a small web page. The board can serve its own page (the ESP8266WebServer examples). Put a button on it that turns an LED on and off, and open it from your phone.
  4. Read a sensor. Add a temperature sensor and show the reading on that same page.
  5. Add a small screen. A small OLED screen on four wires shows the temperature, or the time. On a D1 mini its two data wires go to D1 and D2.

Each step is small on purpose: when something goes wrong, you know where to look.

Where to go next

The story of the chip in the ticker: The ESP8266 chip inside the ticker.