Getting started with the ESP8266 your first Wi-Fi projects
A beginner's start with the ESP8266 Wi-Fi chip: the common development boards, the free tools, five small first projects and where to go next.
Step by step in the manual: Getting started with the ESP8266
Also in the manual: The ESP8266 chip inside the ticker
Chapters
Read it insteadHide the text
The ESP8266 is a small, inexpensive Wi-Fi chip, the one inside this ticker. It comes on little development boards sold almost everywhere, and it's a friendly way to start making Wi-Fi projects of your own.
First, a development board: a LOLIN D1 mini or a NodeMCU. Both carry an ESP8266 with a USB port, so there's nothing to solder to get going.
A USB cable, for power and for loading your programs.
And, if you like, a starter kit: a breadboard, jumper wires, a few lights and buttons, and a sensor or two.
The Arduino IDE is the simplest place to start.
Add the ESP8266 board package in its Boards Manager. It comes with examples you can open and run.
Later, for bigger projects, PlatformIO in Visual Studio Code.
Start by blinking the board's light. It proves the board, the cable and the tools all work.
Then join your Wi-Fi, and print the board's address.
Serve a small web page from the board, with a button on your phone that turns a light on and off.
Read a sensor, and show the temperature on that same page.
Then add a small screen, to show the temperature or the time.
Open projects like Tasmota, ESPHome and WLED run on these same boards.
Their code is open, so you can read how others solved what you're working on.
Take it one small project at a time. A finished product is a much longer road.
This ticker took years to get where it is today. Your first project can take an afternoon. Start small, and have fun.
The boards, the tools and the links are on our page about getting started with the ESP8266.